The Accuride 3832HDSC drawer runners, also known as drawer slides are designed with front disconnect, the disconnect function is operated by allowing a lever or push latch to be positioned near the front of the slides for easy operation. These slides also have a hold-in feature which keeps slides closed until you apply extra force.
Please contact us for volume pricing.
- Closing/opening force: 1.4 - 2.7kg per slide
- Load rating up to 45kg (80,000 cycles), or 50kg (10,000 cycles)
- 100% extension slide
- 12.7mm slide thickness (14mm with mounting bracket)
- Front disconnect
- Hold-in
- Optional clip-on bracket for bottom and platform mounting
- Cam drawer adjust (3.2mm)
- Not suitable for flat mounting
- Temperature -20°C to +70°C
- 12 hours salt spray test
- Sold in pairs
Notes:
- Fixing recommendation is M4 screw/4mm wood screw/6mm Euro screw
- Maximum head height 2.5mm/9.6mm diameter
- Horizontal mounting is not recommended
- Drawer width should not exceed slide length
- Load ratings quoted are the maximum for a pair of side-mounted slides installed 450mm apart unless otherwise stated
- Please see the technical drawing for hole exceptions
Material - Mild Steel
Finish - Zinc Plate and Passivate
SL = Slide Length
TR = Travel
W = Weight of slide (kg) - per pair
L1 = Load rating of slides (kg) at 10,000 cycles
L2 = Load rating of slides (kg) at 80,000 cycles